PanelScan Integration Guide Scan Setup Scan Setup is the second tab. It allows you to enter the type of grid on the panel, the number of rows and columns, and the types of symbols on the panel. These entries are described in the following pages. Standard Grid Layout Standard Grid Layout is used when there is a regular X, Y pattern of boards on each panel. Enter the number of rows and number of columns. • Rows – This can be set for as many as 10 . • Columns – This can be set for as many as 16 . Mirrored Grid Layout The boards on the panels in your application might be flipped 180 degrees to achieve a tighter fit.
For these kinds of panels, enter the number of rows and columns of boards, and also enter which row and column has the first mirrored board. In the example below there are 4 rows and 5 columns , and the board at Row 1 , Column 2 is the first mirrored board. In this setup you will be prompted to click this first mirrored board label as well as the upper right and lower left board labels to complete the automatic board layout. • Rows – This can be set for as many as 10 . • Columns – This can be set for as many as 16 . • First Mirrored Row – This is either 1 or 2 . • First Mirrored Column – This is either 1 or 2 . 21 Copyright © 2019 Omron Microscan Systems, Inc.