PanelScan Integration Guide Report Format When PanelScan runs, it reads all the barcodes or Data Matrix symbols on a board and concatenates their data into a single string. This string is saved to a log file in the C:\PanelScan\Logs directory. Each panel becomes a record in this file. Each record contains all codes from each board on the panel and the panel ID (if Panel ID is enabled). The Report Format tab allows you to select the format of each panel’s record, and to select the name and type of the log file. Log File Formatting Log files are saved in CSV (comma-separated value) format or in XML format.
Log files can be named with data from the Work Order Info tab, with the Panel ID, with a user-defined name, or with an XML file. Log files can also be saved with work order and tray count. See TCP/IP Communication for information about tray count. CSV File Format When saving to a CSV file, you can configure the record string. The settings allow you to set a preamble and a postamble. The settings also allow you to determine whether Work Order Info is contained in the record, whether the board row and column number is included, and it enables you to set a specific board delimiter. These are described below. Panel Preamble – When enabled, the preamble string is prepended to each record.
The preamble is blank by default. Prepend Work Order Info to Panel Report – When enabled, entries 2–5 from the Work Order Info tab are included in each record along with the number of rows and columns of boards on the panel. For example, the string 456_789,001,A,2,2,NONE will be included based on Work Order settings. The string represents entries 2–5, the number of rows and columns of boards on the panel, and the word NONE . 25 Copyright © 2019 Omron Microscan Systems, Inc.