CAUTION! •Do not allow occupants to carry babies or infants on their laps. •Children must always ride in appropriate child restraint devices. •To ensure children are safely seated, follow all instructions provided in this document and the child restraint system manufacturer. • The rear seats are equipped with tether strap anchorages on the back of the seat. REMINDER •BYD Auto recommends that children should use an appropriate child restraint system, and it is recommended that they are seated on a rear outboard seat. •Always follow the detailed instructions provided by the child restraint system manufacturer. •Make sure the child restraint system is tightly fastened.
Installing the CRS Installing the CRS Identify the appropriate anchorages and install the child restraint system. •Secure the top straps when installing the CRS. Installing ISOFIX/i-Size Child Restraint Systems Rear outboard seating position Rear outboard seating position • The rear outboard seats are equipped with ISOFIX/i-Size anchorages. • The anchorage locations are identified by a marking (see illustration) located on the seat back, directly above the associated anchorages. CAUTION! •The anchorages are located in the gap between the seat cushion and the seat backrest. 26