BYD Atto 3 — Instrument Cluster Indicators

Warning Light and Indicator Description • When the ignition switch is on OK, this warning light does not go on or is steady on. Smart key system warning light • This warning light goes on while driving. • If the key is not in the vehicle when the power button is pressed, this warning will light up for a few seconds, a beep will be heard, and a "No key detected, please check whether the key is in the car" message will be displayed on the cluster. REMINDER •A warning light that lights up briefly during operation does not indicate that there is a problem.

03 •If the parking brake system warning light and the ABS warnings light up at the same time, immediately stop the vehicle safely and contact a BYD authorized dealer or service provider. In this case, when the brake is applied, not only will the anti-lock braking system fail to work, but the car will also become extremely unstable. DASHBOARD • If an electronic smart key matching the vehicle is inside and the power button is pressed, the warning does not light up and the vehicle is powered on normally. • If the warning light flashes when the power button is pressed, the battery of the smart key is low.

• If the key is not in the vehicle, the instrument cluster prompts "The key is not detected, please check whether the key is in the car". • If both the ABS warning light and braking system warning lights go on after the EPB is released, it indicates that the Electronic Brake-Force Distribution (EBD) system of the front and rear tires has also failed. ABS warning light • When the ignition switch is on OK, this warning light goes on. If ABS is working normally, this warning light goes off in a few seconds. If ABS is faulty, the warning lights up again until the fault is cleared. Tire pressure warning light • When the ignition switch is on OK, this warning lights up.

It goes off in a few seconds if the tire pressure monitoring system (TPMS) works normally. If the system is faulty, this warning light goes on again. • When the ABS warning light goes on (the parking brake system warning light goes off), ABS is not working, but the braking system still works normally. • When the tire pressure warning light is on or flashing, the instrument cluster displays "Please check the tire pressure monitoring system", and the tire pressure is displayed as "---" on the screen, it indicates that the TPMS is faulty. • When ABS is not working, wheels will be locked in emergency braking or braking in slippery roads.

• If any of the following cases occurs, it means there is a fault in components monitored by the warning light system. In such case, contact a BYD authorized dealer or service provider as soon as possible. • When the TPMS displays "Signal Abnormal", it indicates that the tire pressure signal at the location of the vehicle may be disturbed or the TPMS module is damaged. 39