BYD · Atto 3 · 201 стр.

Руководство пользователя по BYD Atto 3 — эксплуатация и обслуживание (EN)

Оригинальное название: PDF OWNER'S MANU - BYD Auto

Читать онлайн

Похожие инструкции

Содержание

Текст документа

Foreword Thank you for choosing BYD ATTO 3. To better use and maintain your BYD ATTO 3, please read this manual carefully and keep it properly after reading. Special Instructions: BYD recommends that you choose genuine spare parts and use, maintain, and repair the vehicle properly in accordance with this manual. The use of non-genuine spare parts to replace or modify the vehicle will affect the performance of the entire vehicle, especially its safety and durability. Vehicle damage and performance issues caused by use of non-genuine spare parts will not be covered by the warranty.

In addition, modifications to vehicles may also violate national laws and regulations and local government regulations. Thank you again for choosing BYD ATTO 3, and your valuable comments and suggestions are welcome. To enjoy better services, please provide your accurate contact information. If there is any change to the information, contact a BYD authorized dealer or service provider to update the information in the system. You are also advised to pay attention to the relevant national laws and regulations and local policies, and register the vehicle as soon as possible; otherwise vehicle registration may fail.

Pay attention to the "REMINDER", "CAUTION" and "WARNING" symbols in this manual, and follow the instructions carefully to avoid injury or damage. These symbols are defined as follows: REMINDER: Items that must be observed to facilitate maintenance, etc. CAUTION: Items that must be observed to avoid damage to the vehicle. WARNING: Items that must be observed to ensure personal safety. is a safety mark that indicates an operation that should not be performed or an event that should not happen. The descriptions marked with the asterisk (*) in this manual are specific to only some model configurations, and applicable only when the vehicle has these configurations.

The picture used is taken from one of these configurations. If there is any difference with the vehicle you purchased, refer to the actual vehicle. * This manual is expected to help you use the product correctly, and does not provide any description of the configuration and software version of this product. For details about the product configuration and software version, please refer to the contract (if any) related to this product, or consult the seller who sold the product to you. 1

Стр. 2

Copyright © BYD Auto Co., Ltd. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of BYD Auto Co., Ltd. All rights reserved Contacting Us If you require assistance or clarification on policies or procedures, please contact the customer relationship center. E-mail: bydauto@ateco.co.nz 2

Стр. 3

Model Overview BYD ATTO 3 is a new energy, new power, and pure electric passenger car. It is the kind of environmentally sustainable product that BYD is dedicated to making. It features a load-bearing body, front-to-rear longitudinal beam, and power battery pack integrated with the body to fully ensure the safety of the battery and entire vehicle. BYD ATTO 3 is driven by electric motors in various working conditions, and therefore can achieve zero emissions. Being a pure electric vehicle, the BYD ATTO 3 features very low levels of internal and external noise, providing an exceptional driving and riding experience unmatched by any internal combustion vehicle.

The safety of the high-voltage system has been a priority in this vehicle's design, so that driver and passenger safety is ensured in case of a collision. This vehicle is equipped with a battery management unit that continually monitors its power battery, adjusts power output based on various performance indicators such as voltage and current of each battery cell, and prevents issues affecting battery performance, such as over- charge, over-discharge, and overheating, thus permanently ensuring the battery works under ideal conditions. The 150 kW motor provides the ATTO 3 with high speed, high torque, and powerful start-up acceleration ability. 3

Стр. 4