REMINDER ● Secure the top tether when installing the child restraint system. ● Installing child restraint systems: 01 1. Open the anchorage lever trim cover and install the child restraint system to the seat. SAFETY 3. Fasten the snap hook to the anchor support and tighten the top tether to ensure the strap is buckled securely. ①Top tether ②Anchor support ③Snap hook WARNING ● When using the lower anchoring device, make sure that no foreign objects are around the anchoring device and that the seat belt is not stuck behind the child restraint; make sure that the child restraint is securely fixed, otherwise emergency parking or an accident may result in serious even fatal injury to a child.
WARNING ● Push/Pull the child restraint in different directions to ensure it is securely installed. ● Do not install a child restraint on the front passenger seat. REMINDER REMINDER ● If the CRS is equipped with a top tether, secure the tether to the anchoring device. ● The anchorage lever is located on the bevel at the rear end of the seat cushion and is visible by flipping the anchorage lever trim cover open. ● If the driver seat obstructs the correct installation of the child restraint, install it on the right-hand seat of the second row. 2. Lift the head support and open the anchor support cover. 25