How to Use the Neptune 2 Service Manual The Neptune 2 service and installation manual is comprised of 8 chapters that each covers a separate service topic. While a table of contents is provided to aid in quickly locating the desired material, the contents of each chapter are outlined below. Chapter 1 – Operational Description Here you will find a brief overview of how the Neptune 2 Waste Management System works. Included topics are: The components in each subsystem (i.e. vacuum subsystem, or fresh water subsystem) The specific function of those components and how they operate in the system.
Illustration of the user interface panel to familiarize the technician with the indicators and controls of the Neptune 2 Ultra Rover. Chapter 2 – Ultra Rover Disassembly The Neptune 2 Waste Management System is comprised of a docking station (a stationary device; also referred to as a Docker) to remove waste fluid, and a mobile device called a Rover to collect surgical fluid. The Neptune Ultra is Stryker’s two canister model Rover, which also provides a motorized IV Pole and smoke evacuation in the same compact footprint. Chapter 2 outlines the procedures necessary to remove and replace components in the Ultra Rover.
Reference the disassembly examples for a detailed description of how the procedures are structured. Chapter 3 – Docker Disassembly The docking station, or Docker, is a stationary unit centrally located to a power source (standard wall outlet), a fresh water source, and a drain. It is responsible for removing the surgical fluid from the Rover through an automated sequence that requires little interaction from the user, as well as rinse the Rover with detergent after use. The procedures to remove and replace components for the Docker are outlined in chapter 4. Reference the disassembly examples for a detailed description of how the procedures are structured.
Warning Indicators and Disassembly Procedure Example The following examples illustrate how the disassembly procedures are structured as well as the warning indicators used when performing maintenance in the field. The disassembly procedures apply to chapters 2, 3, and 4, although each chapter will cover the steps necessary to perform maintenance on a specific product. iii 0000026959, Rev. C Effective Date: Dec 16, 2014 3:43:21 PM Print Date: Dec 16, 2014 04:03:57 PM