00.10 Model R 1150 GS Connection Nm 34 Brakes Front brake caliper bleed screw 14 Rear brake caliper bleed screw 6 Pressure modulator bleed screw 14 Filler adapter in brake caliper 18 (clean thread + Loctite 243 or new filler adapter) Grub screw in filler adapter 10 ABS unit to holder M 6 screw 8 (clean thread + Loctite 243) 36 Wheels and tyres Quick-release axle clamp screws 22 Quick-release axle threaded fastener 30 Rear wheel to rear-wheel drive Hand-tighten wheel studs, then tighten in diagonally opposite sequence Initial tightening 72 Final tightening 105 Sensor ring to front/rear wheel 4 (hand tight, clean threads + Loctite 2701) Spoke nipple 3.5 + 2 Grub screw 1.1 46 Frame Frame to engine 82 Struts to frame 58 Struts to engine 58 (clean thread + Loctite 2701) Rear frame to gearbox/engine to gearbox and footrest plate to engine 42 (clean thread + Loctite 243) 42 Carrier plate for main stand to engine, right M 12 screw 72 (clean thread + Loctite 2701) Pivot mount to engine, left M 12 screw M 8 screw 72 (clean thread + Loctite 2701) 21 Pivot mount of main (centre) stand (stud bolt) 21 (clean thread + Loctite 243) Pivot mount of main (centre) stand (machine screw) 21 Side stand to pivot mount 58 (clean thread + Loctite 2701)