Removing and installing oil pick-up basket RS110300 X Tightening torque: M 6 screw ...................................................... 9 Nm e Caution: Make sure that the O-ring is not omitted, and is in- stalled undamaged. Replacing oil level sight glass • Pierce the plastic disc with a large screwdriver and lever out the oil level sight glass. • Coat the sealing face of the new oil level sight glass with engine oil and drive it in with drift, BMW No. 00 5 550. Removing conrods • Clamp crankshaft in a vise provided with protec- tive jaws. • Remove conrod. e Caution: Do not accidentally confuse the conrods. Checking conrods • Check conrod dimensions.
a ............................................See Technical data e Caution: Sintered-metal conrods must never be straightened – risk of fracture. 11.41