11.43 1 RS110320 Installing main bearing Measuring axial bearing play • Insert tensioner rail/slide rail pivot pin (1) for • Place crankshaft in engine block. centering purposes. • Insert tensioner rail/slide rail pivot pin (1) for • Tighten M8 and M10 housing screws. centering purposes. X • Tighten housing screws. Tightening torque/tightening order: 1. M 10 screw (oiled) .................................... 45 Nm 2. M 8 screw (oiled) ...................................... 20 Nm 00 2 500 • Measure main bearings front/back in the load di- rection. • Enter measured values on record sheet and de- termine main bearing play values.
a ............................................See Technical data 00 2 510 RS110910 • Screw measuring device, BMW No. 00 2 500, with dial gauge, BMW No. 00 2 510, into tapped hole for alternator carrier cover. • Move crankshaft forwards and backwards and read off play at dial gauge. a ............................................See Technical data