RS110340 Measuring big end bearing play • Measure crankpin with an external micrometer in the thrust direction and offset through 90 o . 11 2 210 RS110360 • Measure big end bearing with internal gauge in thrust direction. • Enter measured values on record sheet and de- termine big end bearing clearances. RS110350 a ............................................See Technical data • Install bearing shells and assemble conrods. • Using tightening angle gauge, BMW No. 11 2 210 , tighten the big end bolt. X Tightening torque: Big end bolts oiled Joint torque.................................................. 20 Nm Wrench angle .................................................... 80 ° 11.44