SC-B9580 User's Guide Appendix C See the Setup Guide and perform the following procedures. How To Use Pressure Roller Spacers ❏ Lock the casters on the printer ❏ Attach the waste ink bottle ❏ Level the printer If wrinkles occur near the end of the media, using spacers so the pressure roller does not press on the end of the media may improve the wrinkles. Use the following procedure to install the spacers to the pressure rollers. ❏ Attach the bulk ink solution ❏ Make parallel adjustments ❏ Attach the media support ❏ Connect the computer communication cable How to install spacers U Setup Guide (booklet) A Confirm on which pressure rollers to install the spacers.
If you do not have the Setup Guide on hand, you can check the Online Manual. Spacers are installed in a total of 4 positions, 2 each on the left and right pressure rollers that press on the ends of the media. Look at the left and right ends of the media, to confirm the pressure rollers that are pressing on the media. D Plug the power plug into an outlet with a grounding (earth) connector, and then turn on the power. The illustration shows an example of pressure rollers pressing on the right end of the media. If the edge of the media is in the A position, install the spacers on the A and B pressure rollers.
If the edge of the media is in the B position, install the spacers on the B and C pressure rollers. c Important: The shape of the plug varies with the region or country of sale. Use the supplied power cable only. E Perform a Print Head Nozzle Check to check for clogged nozzles. U “How to Print a Nozzle Check Pattern” on page 72 F Execute Print Adjustments in the Settings menu. U “Optimizing Media Settings (Print Adjustments)” on page 47 Transport Before transporting the printer, contact your dealer or Epson Support. 120