Additional Information Settings Music Managing Game Files Safety Precautions Part Names/Connecting Peripheral Equipment Before Using the Dreamcast Playing a Game Ending a game 1 Press the OPEN button to open the disc door. Make sure the disc has stopped spinning completely. 2 Remove the disc. 2 Put your index finger or middle finger in the center hole of the disc, then gently lift up the edge of the disc with your thumb. 3 Close the disc door and press the POWER button to turn off the power. 1 Changing discs To change discs and continue playing games, shut the disc door without turning off the power after exchanging discs. Certain games may encompass more than one disc.
Follow directions in the game to exchange discs during gameplay. Caution Disc drive hub Opening the disc door after the Dreamcast power is turned off is extremely dangerous, since the disc will continue spinning at high speed without the brake to slow it down. Be sure to follow the proper procedure when removing a disc. Do not press down forcefully on the disc drive hub. Doing so could result in injury or damage the Dreamcast. R esetting If the A Button, B Button, X Button, Y Button and Start Button are all pressed at the same time, the game in progress will be stopped and the game title screen or the main menu will be displayed. The game data of the game in progress will NOT be saved.
If you are using a Sega authorized controller which does not have these buttons, see the operating manual which came with your software or peripheral equipment. If a game is in progress The game will stop and the game title screen will be displayed. A, B, X, and Y Buttons If the game title screen is displayed The main menu (see page 11) will be displayed. START Button Note␣ You cannot reset the Dreamcast while game data is being saved or while the disc is being accessed. 13