Arlo Essential Indoor Camera 2nd Generation 6. Select your 2.4GHz Wi-Fi network. Enter the Wi-Fi password and wait for it to be verified. 7. Enter a name for your camera and select Continue . 8. Your camera will check for firmware updates. 9. The Arlo Secure App will then guide you through camera placement and mounting. Your camera is now onboarded! Find a good location for your camera Select a location for your camera with a clear vantage point to fully optimize the wide field of view. For the best experience, choose a location with a strong Wi-Fi signal and check the Wi-Fi signal strength in the Arlo Secure App.
For information about Wi-Fi connections, see Tips for optimal Wi-Fi performance on page 11 . Wall mount your camera Your camera comes with a mount and a screw kit. 1. Place the mount and secure it with screws. If you’re mounting the camera on drywall, use the drywall anchors we provide. The arrows on the mount should be pointed upwards. 2. Attach the camera to the mount by sliding the camera base down until you hear an audible click. Make sure both arrows are aligned and pointing upwards. 3. Tilt and swivel to adjust the camera angle. 8 Get Started User Manual