Identifying the control panel components Fax controls Fax capability is available on the HP LaserJet 3330 product only. Use the fax controls to send and receive faxes. These controls and the fax menu or software are used to change commonly used fax settings. Figure 5. Fax controls The HP 3330 has extensive faxing capabilities. This manual describes only sending a fax to one recipient and receiving a fax. For a full description of the fax capabilities, see “Faxing” in the User Guide on the product CD. To send a fax to one recipient 1 Dial the fax number using one of the following methods: • Use the alphanumeric buttons on the product’s control panel.
• If the fax number you are calling has been assigned to a one- touch key, press that key. • If the fax number you are calling has a speed-dial code, press speed dial , enter the speed-dial code using the alphanumeric buttons, and press menu/enter . Note When dialing with the alphanumeric buttons, include any pauses or other needed numbers, such as an area code, an access code for numbers outside a PBX system (usually a 9 or 0), or a long- distance prefix. For more information, see “Using dialing characters” in the User Guide on the product CD. EN Identifying the control panel components 31