Table 10. Control panel error messages (continued) Message Cause Solution Fax Send Error An error occurred while trying to send a fax. Try resending the fax. Try faxing to another fax number. Check that the telephone cord is securely connected by unplugging and replugging the cord. Check for a dial tone on the phone line by pressing fax/send . Make sure the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. Fit to Page on Flatbed Only Fit to Page does not work when the ADF is being used. Use the flatbed or choose another reduction/enlargement setting.
Group Dial Not Allowed In Group The speed-dial code you entered is programmed for a group. Adding a group-dial to another group-dial is not allowed. Enter one-touch keys (programmed as an individual speed dial) or speed-dial codes to a group-dial Group Is Full. [Fax] To Start The maximum number of fax numbers that can be added to an ad hoc group is 20. Resend to the ad hoc group using less fax numbers. Invalid Date An invalid date was entered, such as June 35. Reenter the date. Invalid Entry Invalid data or response. Correct the entry. Memory Low. Press [Cancel] The product memory has been almost completely filled. Allow the product to finish the job or press cancel to cancel the job.
Memory Low.1 Copy. Press [Cancel] The product completed making one copy. The remaining copies have been canceled because of low product memory. Press cancel to clear the error. Use the HP LaserJet Director to make multiple copies of large documents, or break the job into smaller jobs containing fewer pages. Memory Low Only 1 Copy Made The product does not have enough memory to complete the collated copy job. Reduce job size or copy one at a time. 42 Chapter 2 - Operation EN