Installation and connection en Drinking water connection Connect your appliance to a drinking water connection. Installing the drinking water connection Note Ў If you are replacing the appliance, you must use a new water supply hose. 1. Consult the installation instructions supplied for the steps required here. 2. Connect the appliance to the drink- ing water connection using the en- closed parts. Observe the "Technical data" → Page 60 . 3. When doing so, check that the drinking water connection is not kinked, crushed or twisted. Electrical connection Connecting the appliance to the electricity supply Notes Ў Please follow the "Safety instruc- tions" → Page 4 .
Ў Connect the appliance to alternat- ing current only, in the range of 220 - 240 V and 50 Hz or 60 Hz. Ў Please note that the water safety system is only functional if there is a power supply. 1. Insert the non-heating appliance plug of the power cable into the appliance. 2. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate. 3. Check that the mains plug is inser- ted properly. 13