Chapter 1: Introduction P3TDER Quick Reference Jumper Description Default Setting JA2 LVD SCSI Ch A Term. Open (Enabled) JA4 LVD SCSI Ch B Term.
Open (Enabled) JBT1 CMOS Clear Pins 1-2 (Normal) JP1 FSB Speed Setting Pins 1-2 (Auto) JP3 Spread Spectrum Open (Disabled) JP56 Speaker Enable/Disable Closed (Enabled) JP58 LAN1 Enable/Disable Pins 1-2 (Enabled) JP62 LAN2 Enable/Disable Pins 1-2 (Enabled) JP64 SCSI Enable/Disable Pins 1-2 (Enabled) JP65 Thermal Fan On/Off Open (Off) JP68 VGA Enable/Disable Pins 1-2 (Enabled) JP72 CPU/CPU Chassis Fan Select Closed (CPU Fan) JP73 Watchdog Enable/Disable Open (Disabled) Introduction Connector Description ATX POWER Primary ATX Power Connector BANK0/BANK1 Memory (RAM) Slots COM1/COM2 COM1/2 Serial Port Connector/Header CPU/CH/OH FAN CPU/Overheat/Chassis Fan Headers J13, J14 IDE Hard Disk Drive Connectors J15 Floppy Disk Drive Connector J16 Parallel Printer Port J18 PS/2 Keyboard/Mouse J214 USB3 Header J215 Power LED Header JA1 Ultra160 Channel A LVD SCSI JA3 Ultra160 Channel B LVD SCSI JF1 Front Control Panel JP52 Chassis Intrusion Header JP54 Third Power Supply Fail Header JP67 NMI (Non-Maskable Interrupt) Connection JP70 IPMB Connector JP71 SMB Connector LAN1/LAN2 Ethernet Port 1 / Ethernet Port 2 PWR_SEC Secondary ATX Power Connector RAID RAID Port Connector SLED1 SCSI Active LED Header USB 0/1 Universal Serial Bus Ports WOL Wake-on-LAN Header WOR Wake-on-Ring Header 1-9