Preface Preface About This Manual This manual is written for professional system integrators and PC techni- cians. It provides information for the installation and use of the Super- Server 6010L. Installation and maintainance should be performed by expe- rienced technicians only. The SuperServer 6010L is a high-end dual processor 1U rackmount server based on the SC810 1U rackmount server chassis and the 370DLR+, a dual processor motherboard that supports either one or two 370-pin Pentium III FCPGA processors and up to 4 GB SDRAM main memory. Manual Organization Chapter 1:
Introduction The first chapter provides a checklist of the main components included with the server system and describes the main features of the SUPER 370DLR+ mainboard and the SC810 chassis, which make up the SuperServer 6010L. Chapter 2: Server Installation This chapter describes the steps necessary to install the SuperServer 6010H into a rack and check out the server configuration prior to powering up the system. If your server was ordered without processor and memory components, this chapter will refer you to the appropriate sections of the manual for their installation. Chapter 3:
System Interface Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system. Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6010L. iii