30 en Language The display language can be set here. Adjusting the grinding unit Water hardness The water hardness setting can be adjusted on this appliance. It is important to set the water hardness correctly, so that the appli- ance indicates accurately when the descal- ing programme should be run. The factory setting for the water hardness is 4. You can check the water hardness using the enclosed test strip or by asking your local water supplier. Dip the test strip briefly in water, gently shake off any drips, and check the result after one minute. The rotary selector (3) adjusts the grind settings from coarse to fine. Ў Ў Warning Adjust the grinding unit only while it is running!
Otherwise the appliance may be damaged. Do not reach into the grinding unit. ● ●While the grinding unit is running, adjust the rotary selector (3) from fine ( a: Turn anticlockwise) to coarse ( b: Turn clockwise) as required. a b Level Water hardness German (°dH) French (°fH) 1 2 3 4 1-7 8-14 15-21 22-30 1-13 14-25 26-38 39-54 Note: The new setting will not become apparent until after the second cup of coffee. Tip: For dark roast coffee beans, choose a finer grind, for lighter beans a coarser grind. Robert Bosch Hausgerдte GmbH TES55236RU.indb 30 04.06.2013 14:35:45