Notification Settings Sets following notification setting. • Beep Notification Setting at an Error Selects beep notification (sounds buzzer or not) when error occurs. (Default setting is [Beep]. The user does not need to change when using with default setting.) • LED Notification Setting at Ink Low Selects LED notification (lights LED or not) when ink level is low. (Default setting is [LED On] . The user does not need to change when using with default setting.) • Notification Setting at a Paper Size/Type Error Selects notification setting at a paper size or type error. Lights Error LED and Paper LED when detecting an error, and notifies error if EPSON Status Monitor 3 is in active.
(Default setting is [No Error Notification]. The user does not need to change when using with default setting.) Follow the steps below to set the notification setting. 1 Turn the printer on. 2 Display the printer driver window. (See How to Use the Printer Driver on page 154 for how to display the driver window.) 3 Select [Maintenance And Utilities] tab and click [Notification Settings]. 4 The [Notification Settings] window is displayed. Select an item to set and click [Next]. 110