Printer Parts 3 roll paper cover ERROR PAPER OUT POWER 2 front cover FEED l POWER FORWARD 1 on/off switch REVERSE RELEASE ERROR RELEASE SLIP DIP Switch Tables Serial Parallel OFF Offline or buffer full Not connected Print density Disabled Disabled Serial transmission speed 2400 bps 4800 bps 9600 bps 19200 bps utter c r tch over 5 roll pa contr 6 slip pape control p SW Function ON OF 1-1 Data receive error Ignored Prin 1-2 Receive buffer 45 bytes 4 K 1-3 Handshaking XON/XOFF DT 1-4 Data word length 7 bits 8 b 1-5 Parity check En 1-6 Parity selection Eve 1-7 1-8 SW Function ON OFF 1-1 Auto line feed Enabled Disabled 1-2 Receive buffer 45 bytes 4 KB 1-3 ~ 1-8 Undefined — — SW Function ON OFF 2-1 Handshaking Buffer full Offline or buffer full 2-2 Reserved Do not change.
Fixed to OFF. 2-3, 2-4 Print density See “Print density” table. 2-5 ~ 2-7 Reserved. Fixed to OFF. Do not change. 2-8 Pin 31 reset Fixed to ON. SW Function ON 2-1 Handshaking Buffer full 2-2 Customer display Connected 2-3, 2-4 Print density 2-5, 2-6 2-7 Pin 6 reset Enabled 2-8 Pin 25 reset Enabled 2-3 2-4 Density ON ON Low power mode OFF OFF 1 (normal) ON OFF 2 OFF ON 3 (dark) 1-7 1-8 Sp ON ON 24 OFF ON 48 ON OFF 96 OFF OFF 19