TM-P60 Technical Reference Guide Appendix C FAQ Q1. The buzzer rings when I turn the TM-P60 on. What should I do? A1.1 Check to see if the power LED is slowly blinking. When the TM-P60 is powered on, it searches for other available Bluetooth devices (host devices). If it cannot find a host device, the power LED slowly blinks and the buzzer sounds. If this occurs, follow the instructions below. ❏ Use a utility to confirm the host device’s Bluetooth settings. Print the TM-P60 self test to confirm if the device is recognized. The passkey, device name, and Bluetooth address are printed on the self test.
See “ To Confirm the Current Setting of the Printer ” (page 3-3) for details on how to print a self test. ❏ The host device may not be within communication range. If there are any objects between the host device and the TM-P60, move the TM-P60 and check to see if the LED has stopped blinking. A1.2 Check to see if the error LED is illuminated or blinking. If an error has occurred, the TM-P60 will cause the buzzer to sound due to the memory switch settings. See “ Beeping Types ” (page 3-2) to check the error cause. A1.3 Run a self test. Various settings can be displayed by running a TM-P60 self test. See “ To Confirm the Current Setting of the Printer ” (page 3-3) for self test procedures.
❏ Use a utility to confirm the host device’s Bluetooth settings. Print the TM-P60 self test to confirm if the device is recognized. The passkey, device name, and Bluetooth address are printed on the self test. See “ To Confirm the Current Setting of the Printer ” (page 3-3) for details on how to print a self test. ❏ The host device may not be within communication range. If there are any objects between the host device and the TM-P60, move the TM-P60 and check to see if the LED has stopped blinking. A1.4 Check the Battery Level If the battery level is “L Level” or lower, the TM-P60 will cause the buzzer to sound in accordance with the memory switch settings. Charge the battery.
(See “ About the Battery Remaining Amount ” (page 4-2). See “ Charging the battery ” (page 2-9) for battery charging procedures. Rev. A FAQ C-1