4 Keypad Operation ENGLISH ‹ Menu Structure and Modes The following illustration explains the operator keypad menu structure. Key operation description DRV LED is on. A Run command will start the motor. Turn the power on (DRV flashes) : : Forward Selection Reverse Selection : : Output Frequency Output Current Output Voltage XX The Monitor Displays are used to read out drive data like terminal status, output frequency, fault information etc. Monitor Display XX Verify Menu XX XX XX The Verify Menu lists up all parameters which are unequal to the default setting. DRV LED is off. The motor can not be started.
XX XX XX Setup Mode XX The Setup Mode can be used to set up a minimum list of parameters necessary to run the application. XX XX In the Parameter Setting Mode all drive parameters can be set up. Parameter Setting Mode XX Switching to reverse: The LED is lit when LOCAL is selected I80E-EN J1000 Quick Start Guide 17