1. Overview This manual describes how to perform camera calibration of the FH series vision system FH- SMDA-GS050B 3D vision sensor (hereinafter referred to as the 3D vision sensor). Some descriptions in this manual assume that the FH series vision system (hereinafter referred to as the vision system) is connected to the robot controller. Refer to the Vision System FH series 3D Robot Vision Application Construction Guide (Cat. No. Z446) and Vision System FH series Robot Connection Guide listed in Related Manuals in this manual. 2. System Configuration For the system configuration, refer to the following manual.
Please refer to System Configuration in the Vision System FH series 3D Robot Vision Application Construction Guide (Cat. No. Z446) for details. 14