10. A/C and Safety System 10-123 A/C system 10.1.10.14 Removal and refitting of battery cooling module A/C outlet pipe assembly (EV) Removal procedure 1. Turn off all electrical appliances and the start switch. 2. Disconnect the battery negative termin al (refer to 3.1.6.1 Maintenance and inspection of battery ) 3. Recover the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) 4. Removing the engine compartment left and right front trim panel assemblies (refer to 8.6.6.20 Removal and refitting of engine compartment left front trim panel （ EV ） 5.
Remove the left and right rear trim panel assemblies of the engine compartment (refer to 8.6.6.12 Removal and refitting of engine compartment rear trim panel assembly ) 6. Remove the battery cooling module A/C outlet pipe assembly. a. Unscrew 2 fixing bolts of the battery cooling module A/C outlet pipe assembly. Tightening torque of bolt: 10±1Nm. b. Remove the battery cooling module A/C outlet pipe assembly ① . CAUTION: – Sealing pipeline connectors. Refitting procedure The refitting procedure is performed in reverse order. CAUTION: – Replace the O-ring with a new one, and apply A/C compressor lubricating oil to the O-ring.
– Vacuum the A/C system after the refitting is completed (refer to 10.1.12.14 A/C system vacuuming – Add the refrigerant (refer to 10.1.12.12 Recovering/adding refrigerant) VOYAH FREE