How to Use Routine Maintenance Scheduled Cleaning Charging Dock Brush Dust Compartment and Filter You can schedule cleaning time in the Mi Home/Xiaomi Home app. The vacuum-mop will automatically start cleaning at the designated time and then return to the charging dock to recharge when the cleaning is done. Place the charging dock on the level ground against a wall. Before plugging the charging dock into a power outlet, make sure there is a distance of 0.5 meters or more on either side of the charging dock. To ensure you can well connect to the vacuum-mop with your phone, make sure the vacuum-mop and charging dock are in the range of Wi-Fi. 1.
Flip the vacuum-mop over and pinch the clips to remove the brush cover. 2. Lif the brush out of the vacuum-mop, then clean the brush bearings. 3. Use the included brush cleaning tool to remove any hairs tangled on the brush. 4. Reinsert the brush, then put the cover back on and press on it until the clips lock into place. 1. Open the vacuum-mop cover, then pinch the dust compartment clip to remove the dust compartment. Note: Weekly cleaning is recommended. Cleaning Mode Four cleaning modes are available in the Mi Home/Xiaomi Home app: Quiet, Standard, Strong and Turbo. The default mode is Standard. Note:
Do not place the charging dock in an area with direct sunlight or where other objects could block its signaling area, as this may hinder the vacuum-mop from returning to the charging dock. Note: It is recommended to clean the brush weekly and replaced every 6 to 12 months. Brush Cover Clips Brush Do Not Disturb Mode Do Not Disturb mode prevents the vacuum from automatically starting cleaning tasks, and the power indicator remains off. You can enable Do Not Disturb or modify its hours in the app. Brush Bearings ＞0.5m ＞0.5m 2. Open the dust compartment cover as indicated by the diagram. ＞1.5m Using the Brush Cleaning Tool 11 12