xiaomi — Xiaomi Mi Smart Antibacterial Humidifier User Manual

How to Use 1. Before plugging in the humidifier, ensure its operating voltage matches the voltage of the power outlet. The humidifier will beep once it turns on, then enters standby mode with the Wi-Fi indicator blinking. 2. Turn on the humidifier: Press the on/off buton, the humidifier will beep and start humidifying. The default speed mode is low, with 1/4 of the circular indicator lighting up. The humidifier will remember the last used mode when it is turned off, and start in that mode when it is turned on. 3. Turn off the humidifier: Press the on/off buton, the humidifier will beep and turn off. Then its indicator and water tank light will go off. 4. Switch the mode:

Press the mode buton to cycle through the mode of low speed, medium speed, high speed, and constant humidity mode, with 1/4, 1/2, 3/4, and the complete of the corresponding circular indicator lighting up. Note: By default, the humidifier will maintain a relative humidity of 60% while in constant humidity mode. 5. Wi-Fi buton: Press and hold the Wi-Fi buton for three seconds when the humidifier is working. The humidifier will beep twice and the Wi-Fi indicator will start blinking white to indicate it is awaiting a connection. Once the humidifier successfully connects with your phone, the Wi-Fi indicator will turn white.

You can press the Wi-Fi buton to turn on or off the Wi-Fi function and the Wi-Fi indicator. When the Wi-Fi function is disabled, the network between the humidifier and your phone is disconnected. 6. Light control: To turn on or off the water tank light and the mode indicator, press and hold the mode buton for three seconds when the humidifier is working. Note: The humidifier is working normally if the water tank light is off. Touch sounds can be enabled/disabled via the Mi Home/Xiaomi Home app. 7. Dry-run protection: If the water tank is out of water or removed from the base, the humidifier will beep three times. Then the humidifier enters standby mode, and the circular indicator will turn red.

By refiling the water or replacing the water tank back onto the base, the humidifier can resume working. 8