Daily Care & Maintenance Warning: Make sure the purifier is turned off and the power adapter is unplugged before performing the following operations. Cleaning the filter compartment To ensure optimal ventilation and purification, use a vacuum cleaner to remove any dust from the air inlets and the filter compartment, or wipe these areas gently with a soft cloth. Note: To avoid damaging the purifier, do not rinse or spray the purifier directly with water, or wipe it with a soaking wet cloth.
Cleaning the laser particle sensor Use a non-sharp tool to open the cover of the laser particle sensor, and then use an air blow gun or hair dryer to clean the filter on the cover and the sensor, as illustrated in the figure. Note: Do not use hot air. 9