Care & Maintenance Cleaning the Dust Compartment, Pre-filter, and Cyclone Assembly 2. Press the dust compartment bottom cover release button, then empty the contents. 4. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn to counterclockwise until it stops, then pull to lift out the cyclone assembly. 3. Push the dust compartment release switch in the direction indicated by the arrow, then gently remove the dust compartment from the vacuum cleaner. 1. The vacuum cleaner's cleaning ability will be reduced if the dust compartment is filled to the "MAX" mark. To regain performance, empty the dust compartment in a timely manner.
Before emptying the compartment, make sure the vacuum cleaner is disconnected from the power, and do not press its power button. 2 Pre-filter 1 2 1 Dust Compartment Release Switch 14 15