ASDA-M Preface Do not turn the power on and off too often. If continuous power on and off is needed, please be ensured the interval is one minute at most. Terminal Wiring of the Main Circuit When wiring, please disassemble the terminal socket from the servo drive. One terminal of the terminal socket for one electric wire only. When inserting the electric wires, do not connect the conductor to the adjacent wire. Before connecting to the power, please inspect and be ensured the wiring is correct. NOTE If there is any difference of each version, please refer to DELTA ’ s website ( http://www.delta.com.tw/industrialautomation/ ) for the latest information. iv April, 2013