15 DEERE ENGINE (TIER 2) REF NO. PART NUMBER QTY DESCRIPTION REMARKS OBSOLETE 2. 154-324 1 CAP (10OF) 1. 194-370 1 ENGINE 4045TF275115I JD 3. 149-624 1 BK S/O COUPLER (10O-10H) 4. 110-353 2 WORM CLAMP (3/4" TO 1-1/2") 5. 116-044 AR BULK HOSE (5/8", SOLD PER 1") 6. 153-160 1 S/O COUPER (18M-10H45) USE 1 @ 5.75" 8. 217-565 1 TEMPERATURE SENDER 100 - 280 F 7. 215-1203 1 SENDER, OIL PRESSURE (0-80PSI) SD SEE FOOTNOTE 1 9. 217-247 1 WATER TEMPERATURE ADAPTER 10. 107-009 1 FLG LK SCREW (M12-1.75 X 25MM) 11. 106-396 1 WASHER (M10, HARDENED) 12. 184-427 1 BOSS 13. 156-241 2 STREET ELBOW (02N-02NF90) 14. 159-625 1 FUEL FILTER HOSE (06O) 16. 106-527 2 SCREW (M14-2.00 X 50mm) 15.
106-989 2 FLG LK SCREW (M8-1.25 X 35mm) 17. 310-599 1 MOUNT 18. 178-358 1 SLEEVE 20. 106-386 2 FLG LOCKNUT (M8-1.25) 19. 107-002 2 FLG LK SCREW (M10-1.50 X 30mm) 21. 156-277 1 COMPRESSION NUT (05T) 22. 323-634 1 FILTER MOUNT 23. 194-478 - ENGINE OIL FILTER 24. 106-124 1 SCREW (M10-1.50 X 110mm) 26. 106-382 4 FLG LK SCREW (M10-1.5 X 20mm) 27. 156-275 1 TUBE CONNECTOR (04H-05T) 25. 315-543 1 FILTER MOUNT 28. 156-276 1 FERRULE (05T) 30. 106-545 2 LOCKNUT (M16-2.0,PRV TRQ,10.9) 29. 323-365 1 FILTER MOUNT SUPPORT 32. 106-336 2 SCREW (M12-1.75 X 90mm) 31. 105-475 2 WASHER (1/2") 33. 107-001 4 FLG LK SCREW (M10-1.50 X 25mm) 34. 106-266 4 FLG NUT (M10-1.50) 38. 116-946 2 ENGINE SHOCK MOUNT 37.
106-709 2 FLG LK NUT (M12-1.75) 36. 106-643 2 SCREW (M16-2.00 X 25mm, SOC) 35. 107-723 2 SCREW (M16-2.00 X 70mm, SOC) POSITION METAL FACE TO FRAME BOTTOM 39. 337-369 1 FRONT ENGINE BRACKET NOT SHOWN: FOOTNOTES: 1. THE PRESSURE SENDER 215-1203 IS CONNECTED TO THE GAUGE DISPLAY AND THE PRESSURE SENSOR 213-083 (NOT SHOWN) IS CONNECTED TO THE ENGINE ECU. NOTE: REF #2 THRU #29 ARE SUPPLIED WITH ENGINE (194-370). 15 ID0036210