9 WEBM1000 Safety Section (D6T LGP (OEM)) Safety Messages Seat Belt (2) Do Not Weld on the ROPS (3) Safety message (2) is located on the right console to the right of the dozer control. Safety message (3) is positioned on the vertical support of the outside left ROPS post. m WARNING m WARNING A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death. Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification.
Do not weld on or drill holes in the structure. This will void the certification. Consult your Cat dealer to determine this structure's limitations without voiding its certification. This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a payload, should not exceed the mass on the certification plate. A typical example of the certification plate is shown above. Refer to Operation and Maintenance Manual, “Guards (Operator Protection)” for more information.