(7) SERVICE BRAKE PEDAL The Service Brake Pedal is the middle pedal of the three pedals. It controls a dual hydraulic valve, which applies both the front dry disc brakes and the rear wet disc brakes. The service brakes should be used to slow or stop the truck whenever safety and/or truck speed/load conditions exceeds the capability of the retarder. (8) THROTTLE PEDAL The Throttle Pedal is the right pedal of the three pedals. The operator increases engine RPM by depressing the throttle pedal. Engine RPM is decreased by releasing the pedal. (9) LIGHTER Used for lighting cigars/cigarettes. Always use CAUTION with smoking materials.
(10) ASH TRAY Used for extinguishing and depositing smoking materials. DO NOT use for flamma- ble materials such as paper wrappers. Be certain that all fire ash is extinguished. (11) RANGE SELECTOR The lever-type range selector has eight positions ( R, N, D, 5, 4, 3, 2 and 1 ). To change positions, release the range holding mechanism on the lever and move lever to the desired range. "N" NEUTRAL - used when starting engine. The truck cannot be started unless the Range Selector is in NEUTRAL position. "R" REVERSE - use this position to back the truck. Completely stop the truck before shifting from FORWARD to REVERSE or vice-versa.
The Reverse Warning Horn is activated when this gear is selected. "D" DRIVE - position. The transmission will shift to first gear and as truck speed increases, the transmission will automatically upshift through each gear to sixth gear operation. As the truck slows down, the transmission will automatically downshift to the correct gear. HB4-4 Operator Controls HB4010 10/95