Starting Engine Only operate the machine from the operator's seat with your seat belt fastened. Only operate controls while engine is running. Check for proper operation of all controls and all protective devices while you operate the machine slowly in an open area. WARNING Read and understand control pattern before operating. Check that movement of the machine matches display on control pattern label. If it does not match, replace it immediately with correct control pattern label. AVOID INJURY OR DEATH Know the Control Pattern Before Operating. Read Operation & Maintenance Manual For More Information. ISO CONTROL PATTERN Check operation of work equipment, travel system and swing system.
RIGHT HAND HAND LEFT BHL ISO Check for any problem with machine. Check for unusual sounds, vibration, heat, odor, or improper readings from gauges. Check for any oil or fuel leaks. SELECTOR VALVE If any problem is found, stop operation and perform repairs immediately. BHL CONTROL PATTERN Do not use cellular telephones inside operator's cabin when driving or operating the machine. HAND RIGHT LEFT HAND BHL ISO SELECTOR When operating the machine, do not extend your hands or head out of window. VALVE The boom and arm linkage can allow work tool or attachment to contact undercarriage or cabin. Be aware of position of work tool.
FG018704 Figure 28 950205-01404C Do not attempt to start engine by short-circuiting engine starting circuit. This can result in death or serious injury, or fire. When starting engine, sound horn as a warning to alert personnel in the work area. If there is a warning tag or "DO NOT OPERATE" tag hanging from work levers (joysticks) or travel control levers, do not start engine or move levers. Prevent personnel from walking or standing under raised boom, unless it is properly supported. NOTE: When starting engine in cold temperatures, "white engine exhaust smoke" from the tail pipe can occur until engine reaches normal operating temperatures.
Also, a white residue, because of water vapor inside engine, can form at the engine oil fill location. These conditions will not affect engine performance or damage the engine or other exhaust system components. DX225LC-3 Safety 1-38