1. GENERAL DESCRIPTIONS 1. ELECTRIC CIRCUIT DIAGRAM 1-1. HOW TO USE CIRCUIT DIAGRAM CIRCUIT DAIGRAM 1-2. POWER SUPPLY NUMBER 6 A 30 15 15A 15B 58 F31 B 15A 86 30 C HEAD LAMP RELAY 85 87 D C201 3 HEAD LAMP DRIVER ASSIST G E BR F H G101 31 30 15 15A 15B 58 LOCATION CONTENTS A • The power supply line on the circuitry are found in the upper space of the circuit diagram. • Power supply lines are #30, 15, 15a,15b, 58 B • F31 : Fuse number, 15A : Electric capacity. C • This section shows the parts name and the pin number. D • This section represents the connector where different wirings are connected to each other.
C201 indicates the kind of connector, while the #3 means that it is the third terminal of the connector. E • This section shows the color of the applicable wire. - BR - : Red stripes on black ground. F • This section indicates the location of ground Connection. • The bottom line is a battery(-) line or ground(#31). ( G : ground ) G • There are a number of cross lines. A crossing having a dot as in “ A ” means that the B lines A and B are connected to each other. On the other hand, a crossing having no dot indicates that the lines A and B are separate lines. H • This section indicates the body ground Connection. so, there is no wire ground like Gxxx.
15 A NUMBER CONTENTS 30 15 15A 15B 58 • The battery(+) line. • Electric power is supplied when the starter switch is turned to the "ON" position before the engine starts. • Electric power is supplied when the starter switch is turned to the "ACC" position. • Electric power is supplied from the starter switch "ON" relay #87. • #58 is switched ON when the head lamp switch is ON.