GETTING TO KNOW YOUR VEHICLE 15 NOTE: 1. Remove the emergency key (2) by sliding the emergency key release (1) on the back of the key fob and pulling the emergency key out with your other hand. If the vehicle is unlocked with the key fob, and no door is opened within 60 seconds, the vehicle will relock and the security system will arm (if equipped). If one or more doors are open, or the liftgate is open, the doors will lock. The doors will unlock again automatically if the key is left inside the passenger compartment, otherwise the doors will stay locked. 2 All doors can be programmed to unlock on the first push of the unlock button within Uconnect Settings Ъ page 159.
Replacing The Battery In The Key Fob Emergency Key Removal Emergency Key Removal The recommended replacement battery is one CR2032 battery. 1 — Emergency Key Release 2 — Emergency Key NOTE: Customers are recommended to use a battery obtained from Mopar®. Aftermarket coin battery dimensions may not meet the original OEM coin battery dimensions. 2. Separate the key fob halves using a #2 flat blade screwdriver or a coin, and gently pry the two halves of the key fob apart. Make sure not to damage the seal during removal. Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazard- ouswaste/perchlorate for further information.
Separating Case With A Coin Do not touch the battery terminals that are on the back housing or the printed circuit board.