OTHER INCLUDED ACCESSORIES 1 2 3 R 4 5 6 7 8 9 10 11 12 * Extra spool pin and spool felt Use when embroidering with metallic thread. 1. Insert the extra spool pin into the end of the bobbin winder shaft. 2. Install the spool felt and the thread spool in that order, and then thread the upper thread. 1 Insert the extra spool pin into the end of the bobbin winder shaft 2 Spool felt 3 Thread spool * When setting the thread spool, set it so that the thread winds off from the front of the spool. * If using metallic thread, we recommend that you use a 90/14 home sewing machine nee- dle. 13 14 15 16 17 18 3 2 1 Note This method keeps the thread from twisting as it comes off the spool pin.
** Net If using special threads which wind quickly off the thread spool, attach a net to the spool before using. : Cut the net to match the size of the spool. 1 Net 2 Thread spool 3 Spool pin 4 Spool cap 1 4 If using metallic thread, we recommend that you use a 90/14 home sewing machine needle. 2 3 4 Note (For U.S.A. only) Foot controller : Model N5V This foot controller can be used for sewing machine model PE-300S/PE-400D. 7 No.
Part Name Part Code 1 Blin d stitch foot “R” X56409-001 2 Zipp er foot “I” 103561-002 3 Butt on sew-on foot X59375-051 4 Extr a spool pin * XA3336-051 5 Cle aning brush X59476-051 6 Scis sors 184783-001 7 Em broidery foot “Q” XA5357-001 8 Key XA2005-051 9 Ow ner's Manual — 10 Har d case/Extension table — 11 Em broidery Unit Cover — 12 Em broidery unit — 13 Em broidery frame set (Regular) SA432 (USA) XA6628-002 (Others) 14 Back ing material (Stabilizer material) — 15 Net ** XA5523-050 16 Foo t controller XC1154-051 17 Em broidery bobbin thread SABTS (USA) X81164-001 (Others) 18 Spo ol felt* X57045-051