User Manual of EM730/EM730E Series Inverter 125 F19.13 Output frequency in protection Hz 0.00 × F19.14 Output current in protection A 0.00 × F19.15 Bus voltage in protection V 0 × F19.16 Operating status in protection Same as F19.04 parameter description 0 × F19.17 Working time in protection h 0 × F27 Winding/unwinding application macro parameter group F27.00 Application macro 0: Winding mode 1: Unwinding mode 2: Wire drawing mode 3: Straight wire drawing machine mode 0 〇 F27.01 Feedforward gain action channel 0: feedforward gain * set source B 1: Feedforward gain * set source A 2: Feedforward gain * 10V 1 〇 F27.02 Feedforward gain input mode 0: No change in feedforward gain 1:
0.00 to upper limit of feedforward gain 2: - upper limit of feedforward gain to + upper limit of feedforward gain 1 〇 F27.03 Feedforward control Ones place: Feedforward reset option 0: Automatic reset 1: Terminal reset Tens place: Feedforward power-off stop option 0: Save after power failure 1: Not save after power failure Hundreds place: Options of continuous feedforward calculation 0: Not calculate 1: Calculate 10 〇 F27.04 Upper limit of feedforward gain 0.00~500.00 % 500.00 〇 F27.05 Initial feedforward gain 0.00~500.00 % 50.00 ●