Epson L-6034VW Maintenance Guide Before Inspections 9 Caution When performing maintenance, make sure you wear safety glasses, gloves, and masks. If ink gets in the eyes or mouth, or stains the skin, treat the area as follows. ❏ If ink gets on your skin, wash the area immediately with soap and water. Consult your doctor as soon as possible. ❏ If any gets in your eye, flush the eye for at least 15 minutes with room temperature, low pressure, clean water. If the irritation continues, consult your doctor. ❏ If any ink gets in your mouth, consult your doctor immediately. The press contains a light source that emits ultraviolet rays.
Exposing skin or eyes to ultraviolet rays can cause inflammation or skin cancer. Although exposure to weak ultraviolet rays may not cause inflammation, repeated exposure could cause chronic damage. Do not expose skin or eyes to ultraviolet rays. Do not rub the edges of the substrate with your hand. The edges of the substrate are thin and sharp and could cause an injury. When this product is operated in a low humidity environment, the unwinder or rewinder side for the roll substrate becomes electrified, and a static electric shock may occur when installing or removing the substrate.
Take measures such as increasing the level of humidity in the operating environment or touching a piece of an anti-static mat (with an electrical resistance value of several MΩ) to disperse the static electricity before handling the roll substrate.