3.2.2 Command Transmit commands as shown below, using the basic print command structure. [Setting commands for each printing job] ^XA ^IDR:*.*^FS Delete files registered previously ^S(CLR,R,600 Set format resolution to 600 [dpi] ^S(CLR,P,600 Set print resolution to 600 [dpi] ^S(CLR,Z,600 Set printer resolution before replacement to 600 [dpi] ^S(CLS,P,2400^S(CLS,L,2400 Set printable area to 101.6 [mm] x 101.6 [mm] ^S(CLS,C,71 Set gap between printable area to 3 [mm] ^S(CLS,G,48 Set left gap to 2 [mm] ^S(CLS,R,48 Set right gap to 2 [mm] ^S(CLM,T,M1 Set media coating type to Matte Paper ... Other settings are omitted. Refer to Chapter 4 for details.
^XZ [Image registration commands] ~DYR:BASEIMG,B,P,430267,0, .PNG... ~DYR:ORIMG,B,P,194,0, .PNG... [Print commands] ^XA Render images, text, and barcodes ^FO0,0^ILR:BASEIMG.PNG^FS ^FO1000,225^A0N,105,84^FDSCHOOL FEET^FS ^FO1000,445^A0N,105,84^FDModel :^FS ^FO1500,445^A0N,105,84^FD90-22153^FS ^FO1500,610^IMR:ORIMG.PNG^FS ^FO1000,785^A0N,105,84^FDSerial No. :^FS ^FO1500,785^A0N,105,84^FD00000001^FS ^FO1700,1020^A0N,150,120^FD9^FS ^FO1500,1300^BY7,3^B8N,300,Y,N^FD0123456^FS ^S(CUB,S,L Set post-printing buzzer ^XZ [Printing complete commands] ^XA ^IDR:*.*^FS Delete image files that were registered for printing ^XZ Epson ESC/Label Application Development Guide CW-C8000 Series Rev. B Page 10