Produced by: Publication Edited by: Technical Application Strada delle Cascinette, 424/34 10156 Turin - Italy B.U. TECHNICAL PUBLISHING Iveco Technical Publications Lungo Stura Lazio, 15/19 10156 Turin - Italy Publication Nr. 603.93.431 - 1 st Edition Printed in Italy - 01.08
BODY · 232 стр.
Fronte-retro
Document text
E UROCARGO E URO 4/5 Bodybuilders instructions Print 603.93.431 - 1 st edition Base - January 2008 UPDATE DATA Update data Print 603.93.431 Base - January 2008 Section Description Page Revision date 4 PTO’s Complete revision of section for bringing into line with contents and standards used in the Stralis and Trakker ranges. 5 Electronic subsystems Additional information par. 2.16.8. 6 Exhaust systems with SCR Complete revision of section, addition of par. 6.6 and 6.7.
Foreword This manual contains instructions and data for fitting body structures/ancillaries and Vehicle modifications and is intended for skilled and qualified personnel. The bodybuilder is responsible for the design and fitting and any modifications necessary for the installation. The bodybuilder must ensure full compliance with the requirements set out in this manual and with national and international regulations (Construction and Use, and EEC Standards) in force. Before starting any work make sure you are working form the latest Iveco Bodybuilders Instruction manual for the model. Make sure that all safety equipment e.g. eye protection, hard hat, shoe, gloves etc are used.
Check that all mechanical equipment e.g. lifts and handling gear is in good working order and is used. Finally work on the vehicle in good conditions and ensure maximum safety at all times. Any change, modification or installations not covered by this manual and not expressly authorized in writing by IVECO will relieve the latter of any responsibility and make, in particular, the vehicle warranty null and void. For installations / modifications and general information not covered by this manual contact Iveco. On completion of the installation e.g.
body, crane, wheelbase modification the vehicle and systems must be checked to ensure vehicle operation and safety is as designed by Iveco and has not been compromised. If a vehicle system needs to be set up i.e. engine control for PTO installation then contact your local Iveco Service Department. IVECO shafl not be responsible for any change, modification or fittings concerning the vehicle. Due to continuing vehicle improvements and changes in regulations which cover or affect the vehicle, the information in this publica- tion may not always be up to date.
If the bodybuilder has any queries regarding the information contained in this manual regarding the vehicle that is to be worked on he should contact Iveco thbiveco@iveco.com before starting. Symbols - Warnings Danger to people Failure to fully comply with these precautions can involve serious danger for personal safety. Danger of serious damage to the vehicle Partial or complete non observance of these precautions can cause serious damage to the vehicle and invalidate the Iveco warranty. ! Warning / Precaution Failure to fully comply with these precautions can result in serious danger to personal safety and damage to the vehicle with the loss of the vehicle warranty.
Environment protection This indicates the correct use of materials in order to make the vehicle as environmentally friendly as possible. Indicates additional information. NOTE Foreword Print 603.93.431 Base - January 2008
Page header and footer interpretation Foreword Base - January 2008 Print 603.93.431 Section number - Vehicle type Section title page number Print Basic edition - Chapter title number month year Section number - page number Print number Basic edition - month year