Other Vessels : See Other Vessels Settings on the Charts and Editing the Data Fields You can change the data shown in the overlay numbers displayed on the charts and other screens. 1 From a screen that supports overlay numbers, select MENU . 2 If necessary, select Chart Setup . 3 Select Overlay Numbers > Edit Layout . 4 Select a layout. 5 Select a data field. 6 Select the type of data shown in the field. Chart Views , page 7 . Navaids : Shows navigational aids on the Fishing chart. Chart Setup : See Navigation and Fishing Chart Setup , page 6 . Overlay Numbers : See Overlay Numbers Settings , page 6 . This might appear in the Chart Setup menu. Chart Appearance :
See Chart Appearance Settings , page 6 . This might appear in the Chart Setup menu. Navigation and Fishing Chart Setup NOTE: Not all settings apply to all charts and 3D chart views. Some settings require external accessories or applicable premium charts. From the Navigation chart or Fishing chart, select MENU > Chart Setup . Satellite Photos : Shows high-resolution satellite images on the land or on both land and sea portions of the Navigation chart, when certain premium maps are used ( Showing Satellite Imagery on the Navigation Chart , page 4 ). Water Overlay :
Enables relief shading, which shows the gradient of the bottom with shading, or sonar imagery, which helps identify the density of the bottom. This feature is available only with some premium maps. Tides & Currents : Shows current station indicators and tide station indicators on the chart ( Showing Tides and Current Indicators , page 4 ) and enables the tides and current slider, which sets the time for which tides and currents are reported on the map. Roses : Shows a compass rose around your boat, indicating compass direction oriented to the heading of the boat.
A true wind direction or apparent wind direction indicator appears if the chartplotter is connected to a compatible marine wind sensor. When in sailing mode, true and apparent wind are shown on the wind rose. Lake Level : Sets the present water level of the lake. This feature is available only with some premium maps. Overlay Numbers : See Overlay Numbers Settings , page 6 . Chart Appearance : See Chart Appearance Settings , page 6 . Available data options vary based on the chartplotter. Showing a Navigation Inset You can control whether a navigation inset appears on some chart views. The navigation inset is shown only when the boat is navigating to a destination.
1 From a chart or 3D chart view, select MENU . 2 If necessary, select Chart Setup . 3 Select Overlay Numbers > Navigation Inset > Auto . 4 Select Navigation Inset Setup . 5 Complete an action: To show waypoint velocity made good (VMG) when navigating a route with more than one leg, select Route Leg Details > On . To show next-turn data based on distance, select Next Turn > Distance . To show next-turn data based on time, select Next Turn > Time . To indicate how the destination data appears, select Destination , and select an option. Chart Appearance Settings You can adjust the appearance of the different charts and 3D chart views.
Each setting is specific to the chart or chart view being used. NOTE: Not all settings apply to all charts and 3D chart views and chartplotter models. Some options require premium maps or connected accessories. From a chart or 3D chart view, select MENU > Chart Setup > Chart Appearance . Orientation : Sets the perspective of the map. Detail : Adjusts the amount of detail shown on the map, at different zoom levels. Heading Line : Shows and adjusts the heading line, which is a line drawn on the map from the bow of the boat in the direction of travel, and sets the data source for the heading line. World Map : Uses either a basic world map or a shaded relief map on the chart.
These differences are visible only when zoomed out too far to see the detailed charts. Spot Depths : Turns on spot soundings and sets a dangerous depth. Spot depths that are equal to or more shallow than the dangerous depth are indicated by red text. Safety Shading : Sets the shades from the shoreline to the specified depth. Depth Range Shading : Specifies an upper and lower depth to shade between. Symbols : Shows and configures the appearance of various symbols on the chart, such as the vessel icon, navaid symbols, land POIs, and light sectors. Style : Sets how the chart appears over 3D terrain. Hazard Colors : Shows shallow water and land with a color scale.
Blue indicates deep water, yellow is shallow water, and red is very shallow water. Waypoints and Tracks Settings on the Charts and Chart Views From a chart or a 3D chart view, select MENU > Waypoints & Tracks . Tracks : Shows tracks on the chart or 3D chart view. Waypoints : Shows the list of waypoints ( Viewing a List of all Waypoints , page 9 ). New Waypoint : Creates a new waypoint. Waypoint Display : Sets how to display waypoints on the chart. Active Tracks : Shows the active track options menu. Saved Tracks : Shows the list of saved tracks ( Viewing a List of Saved Tracks , page 10 ). Tracks Display : Sets which tracks to display on the chart based on track color.
Overlay Numbers Settings Edit Layout : Sets the layout of the data overlay, or data fields. You can select the data to be shown within each data field. Navigation Inset : Shows the navigation inset when the vessel is navigating to a destination. Navigation Inset Setup : Allows you to configure the navigation inset to show Route Leg Details, and to control when the inset appears before a turn or destination. Compass Tape : Shows the compass tape data bar when the vessel is navigating to a destination. 6 Charts and 3D Chart Views