Copyright information © 2006 Copyright Hewlett-Packard Development Company, L.P. Safety information WARNING! Trademark credits PostScript® 3™ is a trademark of Adobe Systems Incorporated. Potential Shock Hazard Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. Always follow basic safety precautions when using this product to reduce risk of injury from fire or electric shock. Microsoft®, Windows®, and Windows XP® are U.S. registered trademarks of Microsoft Corporation. The information contained herein is subject to change without notice. Read and understand all instructions in the user guide.
Energy Star® and the Energy Star logo® are U.S. registered marks of the United States Environmental Protection Agency. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Observe all warnings and instructions marked on the product. Use only a grounded electrical outlet when connecting the printer to a power source. If you do not know whether the outlet is grounded, check with a qualified electrician.
Do not touch the contacts on the end of any of the sockets on the printer. Replace damaged cords immediately. Part number CB366-90905 Edition 1, 10/2006 Unplug this product from wall outlets before cleaning. Do not install or use this product near water or when you are wet. Install the product securely on a stable surface. Install the product in a protected location where no one can step on or trip over the power cord and where the power cord will not be damaged. If the product does not operate normally, see the online user guide. Refer all servicing questions to qualified personnel. Information regarding FCC Class B, Parts 15 and 68 requirements can be found in the user guide.