Last Modified: 6-7-2017 6.8:8.0.40 Doc ID: RM0000018O7000X agn Model Year Start: 2006 Model: Land Cruiser Prod Date Range: [05/2005 - ] Title: POWER STEERING: POWER STEERING GEAR: REASSEMBLY; 2006 MY Land Cruiser [05/2005 - ] REASSEMBLY NOTICE: When using a vise, do not overtighten it. 1. COAT PARTS INDICATED BY ARROWS WITH POWER STEERING FLUID OR MOLYBDENUM DISULFIDE LITHIUM BASE GREASE 2. INSTALL POWER STEERING GEAR HOUSING SUB-ASSEMBLY (a) Install SST to the rack. SST: 09631-00350 HINT: If necessary, scrape the burrs off the rack teeth end and burnish. (b) Coat SST with power steering fluid. (c) Install the rack into the rack housing. (d) Remove the SST. 3.
INSTALL POWER STEERING GEAR HOUSING OIL SEAL (a) Install SST to the steering rack opposite end. SST: 09631-00350 (b) Coat SST with power steering fluid. (c) Coat a new oil seal lip with power steering fluid. (d) Install the oil seal by pushing it onto the SST without tilting. NOTICE: Make sure to install the oil seal facing the correct direction. (e) Remove the SST. 4. INSTALL SPACER AND CYLINDER END STOPPER (a) Install the spacer. (b) Coat a new O-ring with power steering fluid, and install it to the stopper. (c) Using a wooden block and hammer, drive in the stopper until it is tightly installed. NOTICE: Be careful not to damage the O-ring. (d) Using SST, torque the stopper. SST:
09922-10010 Torque: 110 N·m {1,122 kgf·cm, 81ft·lbf} cardi