Before Starting Maintenance Work Before Starting Maintenance Work Precautions for Maintenance Work 8 WARNING If using glue, glue remover, or ink film remover that contains flammable gas, explosive gas, or the like, ensure sufficient ventilation and make sure that the ignition point and explosion limit are not reached. For details, refer to the instructions of the SDS for the glue, glue remover, and ink film remover you are actually using. Do not operate this machine or the computer while maintenance is being performed.
When performing maintenance work in a location that is out of sight of the control PC operator, make sure that only the person performing maintenance work and no one else is able to operate the control PC. Doing so leads to the risk of your hand or other parts of your body becoming caught in the machine. Do not operate this machine if you have a pacemaker. The electromagnetic waves that are generated by this machine can affect the operation of pacemakers. This machine generates a strong magnetic field. Do not use precision equipment such as watches and mobile phones nearby. Precision equipment could malfunction or become damaged by the strong magnetic field.
CAUTION During maintenance work, wear all the protective equipment described in "Personal Pro- tective Equipment" (eye protection, protective gloves, respiratory protection, etc.) in each section below. • Use protective equipment compliant with the safety regulations. • Using additional protective equipment compliant with the safety regulations is recommended when necessary. Be sure to wear eye protection during maintenance work on areas near the ink path, such as when cleaning around the heads and caps. Failure to do so could cause ink to splash into the eyes.