Operation Using the Microwave for the First Time Setting the Clock Setting the Child Safety Lock 1 1 4 1 Display Window Plug into a properly grounded electrical outlet. Press Stop/Reset to confirm; a colon (:) will appear in the display window. With the oven NOT cooking, press Clock (Less) once; the colon will blink. Enter time of day using the Number pads. When the time of day appears in the display, press Start three times; “ ” will appear in the display. 2 NOTES: These choices can be selected only when you plug-in the oven. 2 2 Press Start once, then Press Timer (More) to cycle between the weight system, Imperial (oz/lb) or Metric ( g / kg ).
Press Clock (Less) to finish setting and the colon (:) will stop blinking. Press Stop/Reset three times; the display will return to the time of the day and Child Safety Lock will be cancelled. 3 NOTES: 1. To reset the clock, repeat NOTES: 1. This feature prevents the steps. 2. The clock will retain the time of day as long as the oven is plugged in and electricity is supplied. 3. The clock is a 12-hour electronic operation of the oven until cancelled. It does not lock the door. 2. To set or cancel Child Safety Press Start once, then Press Timer (More) to cycle between the Beep on or Beep off. Lock, Start or Stop/Reset pad must be pressed 3 times within 10 seconds. 3.
You can set Child Safety display. 4. Oven will not operate while colon (:) is flashing. Lock feature when the display shows a colon or time of day. 11