Section 2—STANDARDS COMPLIANCE 2.1 Standard(s) for safety Conform to IEC 61851, IEC 62196 2.2 Charging mode and connection According to IEC 61851-1, the Charging mode of PulseQ AC Home is Mode 3, and charging connection is the Case C. Mode 3 a method for the connection of an EV to an AC EV supply equipment permanently connected to an AC supply network, with a control pilot function that extends from the AC EV supply equipment to the EV. Case C: Connection of an EV to a supply network utilizing a cable and vehicle connector permanently attached to the EV charger. Charging station Vehicle inlet Vehicle connector Cable 7