Environmental protection and saving energy en Ў Unsuitable cleaning agents may damage the appliance. ▶ Do not use a steam cleaner. ▶ So as not to scratch the finish AquaSensor The AquaSensor is an optical meas- uring device (light barrier) which measures the turbidity of the rinsing water. You can save water with the AquaSensor. Use of the AquaSensor depends on the programme. If the soiling level is high, the rinsing water is drained off and replaced with fresh water. If the soiling level is lower, the rinsing wa- ter is used in the next wash cycle, so reducing water consumption by 3-6 litres.
In the automatic programmes the temperature and run time are ad- ditionally adjusted to the level of soil- ing. on the appliance, do not use sponges with a rough surface or abrasive cleaning agents. ▶ To prevent corrosion, do not use sponge cloths on dishwashers with a stainless steel front or rinse such cloths thoroughly several times before using them for the first time. Environmental protection and saving energy Environmental protection and saving energy Environmental protection and saving energy Disposing of packaging Efficient Dry The appliance door opens automatic- ally during the drying phase. This en- sures a particularly economical dry- ing result.
For best drying results wait until the end of programme before unloading the tableware. The programme has ended when the display shows "0h:00m". If automatic door opening is deactiv- ated, energy consumption increases and the drying phase is usually shortened. → "Overview of basic settings", Page 35 → "Additional functions", Page 20 The packaging materials are environ- mentally compatible and can be re- cycled. ▶ Sort the individual components by type and dispose of them separ- ately. Saving energy If you follow these instructions, your appliance will use less electricity and less water. Use the Eco 50 ° programme. The Eco 50 ° programme is en- ergy-efficient and environmentally friendly.
→ "Programmes", Page 18 11