CE Compliance (for EU only) This product complies with the requirements of EMC and Low Voltage Directives including their amendments. CE marking is the responsibility of TOSHIBA TEC GERMANY IMAGING SYSTEMS GmbH, Carl-Schurz-Str. 7, 41460 Neuss, Germany. For a copy of the related CE Declaration of Conformity, please contact your dealer or TOSHIBA TEC. This product is designed for commercial usage and is not consumer product. This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (for USA only) CAN ICES-3 (A) / NMB-3 (A) This Class A digital apparatus complies with Canadian ICES-003. (for CANADA only) The EA1050B-240 AC adapter should be exclusively used for the B-FV4D-xxxx-QM-R Series printer. The B-FV4D-xxxx-QM-R Series printer must be powered by the EA1050B-240 AC adapter. The EA10681P-240 AC adapter should be exclusively used for the B-FV4D-xxxx-QQ-R Series printer. The B-FV4D-xxxx-QQ-R Series printer must be powered by the EA10681P-240 AC adapter. California Proposition 65 Warning:
USA-California only This Product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. The following information is for EU-member states only: Disposal of products (based on EU-Directive 2002/96/EC, Directive on Waste electrical and electronic equipment – WEEE) The use of the symbol indicates that this product may not be disposed as unsorted municipal waste and has to be collected separately. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centers. The black bar indicates that the product was placed on the market after August 13, 2005.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environmental and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-back and recycling of this product, please contact your supplier where you purchased this product. Notification (for Turkey) AEEE Yцnetmeliğine Uygundur Following information is only for India: The use of the symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about the take-back and recycling of this product, please contact your supplier where you purchased the product. This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1% by weight and 0.01% by weight for cadmium, except for the exemption set in Schedule II of the Rule.